XL 5 Color Dodecahedron Test Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small but interesting 5 tool head test print for your XL
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 262
- Makes
- 2
- Views
- 437
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
A simple yet interesting 5 color test print I created for checking the proper calibration and function of my 5-tool head XL.
I found after some upgrades to the Nextruders and firmware, the faces of this test print had obvious unevenness between color changes. After running the tool offset calibration, and reprinting the test object, layers were obviously better.
Scaled up by 145.348%, height works out to 20mm. On the side where all 5 pieces of the dodecahedron are horizontal, print time is approximately 22m with 4 tool changes. If you place on one of the other faces, the print time is 1 hour and 30 minutes with over 362 tool changes.
Printed with PLA, 0.2mm layer height, 15% infill and 2 perimeters.