Spare Brushes for iRobot Roomba S Series S9 (9150) S9 plus (9550)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare parts for the main brushes for iRobot Roomba S9 / S9 plus
- Rating
- 0 / 5
- Likes
- 11
- Makes
- 0
- Views
- 431
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Standard Digital File License
I really do love my automated house sprites! Even if they overlook some corners sometimes, I appreciate their regular work at home.
Only one thing drives me mad: having just installed a new set of brushes, it happens that the Roomba catches up some hard debris, like a Lego brick, which it can't grind or swallow. And there we go: the all-new $40 set of brushes looks torn and worn like the ones I just threw in the bin.
Buying a cheaper set does even make it worse, these brushes wear much faster or tend to get loose on their axles after a short time.
Since the axles with bearings looked reuseable, I made it up to the drawing board and rebuild the rubber sleeves and spacers.
I've been testing manny different brands and types of flexible TPU filament so far, ranging from a little noisy for the harder ones to smooth like baby skin for the very soft ones. Actually you can choose the filaments according to your flooring.
My favourite up to now became NinjaFlex TPU from NinjaTec or even better NinjaTec Chinchilla TPU.
They turned out to be as wear resistant or even better than the original brushes.
Print time on a Mk4 Prusa is about 6 hours for the whole set.
Tip: Use flexible CA glue and allow to cure or use activator spray to get the joints as soft as the rest.