1 / 8
Filter fabric holder for Europlast 100 vent
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A two piece capsule to hold 10-13 mm filter fabric for Europlast 100 vent
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model has two parts that fit together to sandwich a 10-13 mm polypropylene filter fabric to keep pollen and other impurities not flowing via replacement air inlet. I printed it with ABS but PETG would be ok. PLA not recommend. You can use the air-vent itself as template to draw the marks for cutting the filter. This is optimized for 0.4 nozzle with 0.2 layer height.
NOTE: The model cad/stl is optimized for ABS shrinkage, no scaling needed if printed in ABS, other filament types - print and test.