Mirror Decoration (JWST)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.17 – €3.88 net (excluding VAT)
For file: jwst-mirror-decoration-100.00.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.52 excluding VAT (range midpoint).
- Weight reported by the author
- 40 g
- Print time reported by the author
- 3.72 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A frame module for 100x100 hexagon mirrors that fit on a 210x250 build plate
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 30
- Makes
- 1
- Views
- 486
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
I liked the other JWST mirror decorations I've seen lately, I sourced 100x100 hexagon “wall decor” gold acrylic mirrors and figured out a frame that would fit on my build plate. You will need 18x 100x100mm hexagon mirrors and 6x of this printed part, and an adhesive or tape to hold the parts together. I used Homax 730657 Welder contact cement to permanently set all of the parts. You may need to scale up or down depending on your mirrors, I chose 100.5% for the mirrors to fit inside the part. I had fun building this and looking at it!