1 / 3
Router lift for Dewalt DCW604
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a router lift for Dewalt DCW604 for mounting on a worktable
- Rating
- 5 / 5
- Likes
- 248
- Downloads
- 1,079
- Makes
- 0
- Views
- 9,937
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is inspired by the design by USSA Design (watch their video here: https://www.youtube.com/watch?v=2JYTYOJt_m4). I made my own so it worked with my Dewalt DCW604 router.
You will need to print
- 4x support screw
- 4x support screw cap
Other then that you will need screws for mounting to the table and for holding the model together:
- 4x M6 x 100mm with wingnut
- 1x M6 x 20-60mm for the driveshaft. The top of this will be the method for working the lift. Like a hex head screw or a hex drive rounded screw. The driveshaft is hollowed out, so the length of the screw can be anywhere between 20mm - 60mm.
Print settings:
I printed everything with layer height 0,3 mm and 20% infill.
- Top plate was printed with supports to the buildplate.
- Support screw printed with brim of 5.
- Support screw cap printed with brim of 5.
- Drive shaft gear printed with brim of 5.