6-inch Rack Mount | Anker PowerExtend USB 2 mini
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6-inch rack mount for the Anker PowerExtend USB 2 mini
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 174
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A 6-inch rack mount for the Anker PowerExtend USB 2 mini.
This exposes the two USB ports to the outside/front face of the mount, and the two standard plugs upward (inside the rack). Standard plugs will fit the openings with no clearance issues, but power bricks don't sit flat on the face of the PowerExtend due to the printed frame. If there is enough interest, I can modify the frame to offer more clearance for bricks.
Inspired by and compatible with Mauker's series of 6-inch rack accessories and madmax890's models for the series. See the collection here: 6-inch Rack Mounts
Print Settings:
Print with the face down on the plate. Supports are probably needed due to the couple of floating sections, but they don't require any “custom” supports. Just let your slicer generate them as it sees fit. I've printed mine with 15% infill and 3 perimeters, but if I run into any issues I'll add a note here to print with different settings.