1 / 4
Voron (2020) drill guide
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ez hole drilling even with cheap dollar store drills
- Rating
- 5 / 5
- Likes
- 51
- Downloads
- 246
- Makes
- 3
- Views
- 1,459
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- GNU General Public License v3.0
Easy drill 2020 & 2040 extrusions for you can connect them via blind joints like Voron printers use.
Uses
- two m5x 10 button head screws
- a hammerhead nut
- two F695 bearing (old ones are good enough)
- Superglue or 3x M2x10 Self Tapping Screw for Plastics (like Voron Trident) to trap the top bearing
If you go with glue i still recommend printing the caddy.
Printing should work with PLA, PETG, ABS, i used PETG because thats what was loaded in the printer. Files are preoriented for optimal printing imho.
Photo of the extrusion show's drilling from both sides and the holes matching.
Note the sides with the screw holes are only 19mm long to account for printing errors so you can have it sit flush on the table.