1 / 7
Antler-Duct for Prusa Mini Revo
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
More effective fan duct for Prusa Mini with E3D Revo Micro upgrade
- Rating
- 4.778 / 5
- Likes
- 124
- Downloads
- 542
- Makes
- 33
- Views
- 4,185
- Reviews
- 27
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- GNU General Public License v2.0
This duct is designed to work with the official e3D Revo Micro upgrade, my mod and my custom mount.
It needs to be printed using a temperature-resistant material (ASA/PA/…). The model is optimised for 0.4mm nozzles and the 3mf contains variable layer height adjustments for clean overhangs.
Supports are not necessary.
Assembly:
If you haven't already removed the print-head follow the guide in reverse order.
- To replace the old x-carriage, loosen the belt tension.
- Then pull out the belt. (Maybe mark the positioning.)
- Now you should be able to slide out the bearings.
- Insert the nuts.
- Slide the new carriage onto the bearings.
- Push the belt ends back to their place.
- Readjust the belt tension.
You can use the assembly manual for reference.
Now you can mount the print-head.