AB5 Pyramid for toddlers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is my fifth addition to the activity board for babies. It is intended for stacking according to size.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 26
- Makes
- 0
- Views
- 131
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Haptic Models
- License
- Creative Commons — Attribution — Share Alike
This is another print for my activity board.
It is a classical pyramid with not so classical shape of a spilled milk. Print it all in different colours, preferably put a long screw through the rod and watch your kid stacking it perfectly from the biggest to the smallest one.
Moreover each layer is marked with number, that you can paint in your slicer or with a sharpie.
PYR-11 is a pin that you can put through the rod so that the pyramid can not be disassembled.
Printing:
These are large prints so I tried to save as much filament as possible. That means 2 walls, 3 top and bottom layers and 15% adaptive cubic infill.
You do not need supports.
Check out my other models in this series: https://www.printables.com/@Bobino/models
