Print-in-Place Fidget Clicky Gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A satisfying, loud, clicky gear fidget toy Only 11.4 grams and 35 minutes to print!
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 147
- Makes
- 2
- Views
- 400
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A satisfying, loud, clicky gear fidget toy
Only 11.4 grams and 35 minutes to print!
This model was inspired by https://makerworld.com/en/models/467451-print-in-place-fidget-toggle-switch?from=search#profileId-376540
Note: scaling down the model is not recommended due to the needed clearance between the base and the gear! Also, your slicer will probably give you warnings that the bodies are too close together. Just ignore the warnings and proceed with printing. DO NOT AUTO ARRANGE THE MODEL IN SLICER
Print Settings:
- Nozzle size: 0.4 mm
- Layer height: 0.2 mm
- Infill: 15%
- Supports: No
- Material: PLA
This is my first ever 3D model, so even though it works flawlessly on my A1, it might not be perfect. If you have troubles printing it or have any questions, please post a comment!