Badge holder + yubi + rsa
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A badge holder that holds a little extra. Scroll down for all the options, I have posted .STLs and a .3MF
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 77
- Makes
- 1
- Views
- 486
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is a badge holder that holds a standard card such as an ID, AND there is space for two additional cards (not including the ID). Variants listed below for a mix and match of 0-2 yubikeys with or without RSA.
Version 2 has increased strength on the skinny parts of the "necks" (idk what else to call em, just print the old one and throw it at the ground the part that broke is what I'm talking about), and also reduced some material holding in the front card.
I personally recommend print at an angle like the last photo for increased strength and faster print speeds. Also I recommend printing with the front of the badge facing downward as the more complex parts are on the back and having them face up is easier to print with the fan hitting it directly.
Please leave a like, and any questions or concerns below. I'll respond as soon as I get the chance.
:)