1 / 1
S500 Quadcopter Top Plate with Vibration Isolation and Raspberry Pi
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
S500 top plate with vibration isolation for pixhawk autopilot and mounting for raspberry pi flight computer.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 84
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This model is a replacement for the stock top plate that comes with the s500 frame kit. It includes vibration isolation for an autopilot / flight controller board and provisions to mount a raspberry pi companion / flight computer for autonomous operation.
Extra hardware required:
- M3x8 Heat Set Insert (x6)
- M3 Standoffs
- 10×12 vibration isolation gummies
- M3x6 Screws (x6)
Build Settings:
- Material - PETG
- Infill - 50%
- Supports - No
I strong recommend mounting the Raspberry Pi Protection Plate as it will keep it safe (especially the GPIO) in case of mishaps where the drone flips or crashes. I say this from experience.