CPE 210 510 window suction cup holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a suction cup holder to mount a TP Link CPE210 or CPE510 to a window or other flat surfaces.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 88
- Makes
- 1
- Views
- 982
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a suction cup holder to mount a TP Link CPE210 or CPE510 to a window or other flat surfaces.
I used suction cups with 40mm diameter and a 10mm long M4 stud on the backside with a knurled nut. You can source them via internet quite easy.
I do not recommend to use PLA, as it most likely won't withstand the weather conditions outside. Better use PETG or any other tougher material, that holds up to rain and direct sunlight.
Print instructions
Doesn't really matter, but dont use PLA for direct sunlight applactions.
I used PETG and Colorfabb HT on different applications and all are doin just fine.
3-4 perimeters will help with the holes for the suction cups, but thats maybe already a bit too overcautious.