fizik Antares Versus evo Saddle Pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can print your own "adaptive" saddle pads for fizik Antares Versus evo.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 42
- Makes
- 0
- Views
- 619
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
I used an Antares Versus evo R5 saddle for about a year, but the saddle cushions eventually started to break. So I wanted to combine the saddle frame with new 3D printed pads.
Printing
You will need 5-10 bottom layers. Set perimeters and tops to zero and disable the infill anchors.
Now, choose your infill. There really is no right or wrong there but I did some test samples with different infill styles and found gyroids to work best. The infill density will impact the hardness of your saddle. If you have a softer material, 20-30% infill density might be just fine, for stiffer filaments I'd recommend less.
(In the pictures, you can see 20% gyroids printed with 68D TPU, but if I would do it again, I'd probably lower the density or use a softer material because the saddle is really quite hard)
I know how annoying support removal (especially with TPU) is, but I can't think of a better way to print this, so I used tree supports at the bottom.
Compatibility
These models work with the 139mm versions. If you are using a different size, you could take some measurements yourself and adjust the dimensions accordingly.
This should be compatible with all fizik Antares Versus evo saddles, but I am not able to verify that for each model.
(Dis-)Assembly
Carefully peel of the damaged cushions. You can also use a dull knife to do so, but please make sure not to structurally damage the saddle.

Once you're done with that, you can glue on the printed parts using CA-glue or something similar.