1 / 4
Dovetail box for Dutch Blitz cards
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.10 – €2.57 net (excluding VAT)
For file: lid_tight_0.2mm_PLA_MINI_2h12m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.33 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 2.2 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A dovetail box to hold a set of Dutch Blitz cards
- Rating
- 4.333 / 5
- Likes
- 16
- Downloads
- 167
- Makes
- 2
- Views
- 1,165
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A dovetail box to hold a set of Dutch Blitz cards.
Design notes:
- Loosely based on: Sliding Dovetail Lid for 3D Printed Box
- These fit a set of knock-off cards I bought on AliExpress that measure 88 mm (L) × 57 mm (W) × 25 mm (H). So you may want to verify the dimensions of authentic cards before printing.
Versions
- The
lid_normalfile contains a lid that is exactly the same size as the box. I found for my printer, this did not provide a suitably snug fit. - The
lid_tightfile is 0.1 mm wider, which is the one I ultimately used. I sanded down the edges (very lightly) then applied a tiny bit of vaseline to help it slide smoothly.