Komperdell touring poles baskets
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made baskets in TPU that fits Komperdell touring poles
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 24
- Makes
- 0
- Views
- 110
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter Sports
- License
- Creative Commons — Attribution — Share Alike
The original attachment system from Komperdell is not very good. I lost both my baskets.
Make sure to print the small strips and use some superglue to make sure that the basket stay in place after you locked them in. (Look at my picture with the red marking) Maybe there is a better solution, but this is the best I came up with.
I printed with a 0.6 nozzle on a Prusa MK3s+ and Amazon Basics TPU
There is also a picture of the original baskets from the factory as a reference, so you know that you print for the correct ski pole.
UPDATE: I made a version 2 in November 2025. My original didn't stand really cold weather on a long tour today ,and hopefully this version will work better in harsh conditions. I use more rounded features and it look better than the old one in my opinion.