Barrina T8 grow LED holders for Hydroponic tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A twist ring, bottom support arms, and middle tier support arms, for Barrina T8 LED grow lights.
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 231
- Makes
- 1
- Views
- 1,247
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print 3 of the bottom arms, a multiple of 3 of the middle support arms (I used 3), one ring segment, and (optionally) couplers that will help with alignment if you extend the LED lights (for instance if you want to add a 2 foot height extension).
These are specifically made for Barrina T8 LED growth lights that come with curved aluminium reflectors. The bottom lock ring is intended to twist into a 3d printed bucket lid, so that the bottom arms can rest on the bucket. The bottom arms support the weight of the fixtures, and the mid tier support slide over the lights on the top, and mount to one of the 3-pot sections of the hydroponic tower.
Note: the ring section needs to be printed with supports.
You will need 6x M4 button cap bolts and nuts (stainless steel and nyloc nuts recommend) to attached the arms to the ring sections. For the bottom arms, insert the bolts from the bottom, with the nut on top.