HO Scale Utilities Building
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Architecture & Urbanism
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small brick building that I used to often drive past. See it here on Google Maps -
https://maps.app.goo.gl/a4nyuadv9ih9TkUM9
From the building's proportions and from the remains of hardware on the walls, I suspect the building housed electric or telephone utilities.
The model features interior detailing on the walls and roof.
The walls are a single print to avoid corner joints. The roof is in three parts: framing, a sheet representing planks for the interior, and a top providing the roof surface and flashing. The roof surface is not textured; finish the roof with your favorite method to represent tarred membrane or gravel.
For windows and doors, print two parts for each opening. Sandwich the parts back-to-back with glazing between them to create doors and windows with interior detail. You may need to sand the windows and doors to fit. There is no positive positioning of the windows and doors; I just center them front-to-back in the opening until they look right.