1 / 7
Node 804 extra hdd cage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Node 804 needed more space! So here is an extra 4 hard drive holder
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 69
- Makes
- 0
- Views
- 489
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed this using the following,
- PLA
- MK4S 0.20mm speed
- 3 perimeter (2 could work as well but because of fan screws coarse nature)
- Printer Settings → Advanced → “External Perimeters first” (this should fix the line on the sides of the print, similar issue as benchy hull line)
Additional Modification
- Drill fan holes using 3/16 drill bit
Additional Items
- 4 x PC case fan screws as shown bellow,
Fitment
- Fitment depends on cooler and usb3 connector (if straight connector, you will most likely have to disconnect it. buy an angle adapter).
- In the pictures it is a tight fitment between front case fan and CPU cooler fan but it fits (in my application).
- drives can be screwed to the holder, on the sides. Do that before putting it in the case, it will be difficult to screw in the holder to the case afterwards due to the weight of the drives. just be careful.
This is my first posted model, i have been looking for ways to add more storage to the mighty Node 804 case that so many love as a media server, figured id share. I have seen many HDD holders/cages but none fit this purpose. This may look similar to some as they gave me ideas but this is made from scratch using fusion 360.