Venom in the Rain Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This image was AI generated and I played with it in Hueforge until it was just right. Hope you can enjoy it as well!
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 49
- Makes
- 1
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
This image was AI generated and I played with it in Hueforge until it was just right.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.3mm and the Actual Depth is 2.2mm
Filaments Used:
PLA Basic Black Transmission Distance: 0.3
PLA Basic White Transmission Distance: 5
This print uses 2 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to White for the rest.
The frame that you see around it is not my creation and therefore I cannot post it attached with the file. However, you can find it and other variations here https://makerworld.com/en/models/493922-hueforge-frames