1 / 2
Thinkcentre M920X, M920Q, M720Q M.2 SSD Retainer — image 1
1 / 2

Thinkcentre M920X, M920Q, M720Q M.2 SSD Retainer

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 3D printable M.2 SSD retainer for the Thinkstations that use a hole in the PCB and a plastic piece to hold the SSD in

Rating
0 / 5
Likes
19
Downloads
93
Makes
0
Views
884
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

After performing the https://github.com/badger707/m920q-dual-NVME mod on my M920Q, I needed a piece of plastic to retain the SSD. So I made this.

Printing notes:
These parts are very small, it's recommended to print both of them at the same time so that each layer has sufficient time to cool. I recommend a layer height of 0.1-0.05mm. Use a lot of cooling and lower nozzle temperatures if possible. 

Also you can try adjusting the size of the peg piece since how that fits is highly dependent on your printer and filament (because it's so small). 

Tags