I present to you a free, printable model of French Navy Cruiser Submarine Surcouf from the game Mir Korabli.
Model is at 1:625 scale (about 17cm long) and are remodeled from the ground up with the goal of maintaining details while also presenting all the moveable mechanics found on the actual submarine. Features includes:
Print in place main turret with built in supports and moveable barrels.
Separate deck, upper, and lower hull to allow different colored print without AMS.
Moveable rear torpedo launchers.
Moveable front dive planes.
~20gr of material (even less if printing it without sprue).
~3hr print even at slow speed.
Standee and nameplate for display.
Assembly guide included.
Print Settings
Layer height: 0.10mm
Initial layer height: 0.20 mm
Initial layer: 0.42 mm
Elephant Foot Compensation: 0 mm/disabled
Wall generator: Arachne
Minimum wall width: 50%
Minimum feature size: 20%
Wall loops: 2
Top surface pattern: Monotonic Line
Sparse infil density: 15%
Sparse infil pattern: Adaptive Cubic
Initial layer speed: 15mm/s
Outer wall: 30mm/s
Inner wall: 50mm/s or less
Other scale? Scale the model in the slicer to this values:
1:700: 89.25% (0.2mm nozzle required)
1:350: 176.94% (Requires 256mm bed and parts printed separately)
By the way, I also made a printable RN Venezia, an imaginary 15 guns Italian cruiser from World of Warship. It is the biggest most complex model I've made by far. You can buy the model from my Cults3D page.
If you want to see more warship related creations you can support my work through Patreon:
