Space-efficient Straw Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Store metal straws (or other hollow tubes) in a drawer.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 15
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- GNU Lesser General Public License
You probably want to customize this design before printing.
The STLs fit WMF-brand metal straws (180mm long, 8mm outside diameter) in an 80mm tall drawer.
Customization
The OpenSCAD source files and further instructions are available here: https://github.com/mbugert/openscad-projects/tree/main/straw_rack
Print Instructions
Print orientation: rotate it so the pins for each straw point upward enough that they can be printed without supports, and use paint-on supports for the bottom area.
With PLA, warping can become an issue. I printed a single 6-straw version and the warping led to the straws pointing in all sorts of directions. Printing two 3-straw versions worked better. (For the spacing between the straws, 1x6 vs. 2x3 also makes no difference.)