1 / 6
Single-Dose Hopper for Breville/Sage Barista Express/Pro (simple, fully-printable) — image 1
1 / 6

Single-Dose Hopper for Breville/Sage Barista Express/Pro (simple, fully-printable)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Small, simple, fully printable, no supports or hardware required. Designed for my Breville Barista Express BES870XL.

Rating
5 / 5
Likes
12
Downloads
173
Makes
3
Views
926
Reviews
3

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Public Domain

Disclaimer

This hopper does not have much finger protection when installed. It is also easy to disengage the grinder lock when installing/uninstalling the hopper.

If you choose to use this, please only install/uninstall it with the machine off, and be careful.

I also encourage you to look into the food safety of your specific filament. Mine is printed with a random cheap PLA, and I will probably die a bit early for it.

 

Motivation

For a consistently good espresso, you need to be quite precise about the amount of coffee in your puck. The built-in dosing system in the Breville Barista Express is time-based and not precise enough for consistent results. Because of that, a lot of people stop filling up the hopper and weigh just enough beans for one dose, grinding through all of to achieve a more consistent result.

The original hopper, however, does lead to some of the half-ground coffee being retained above and around the burrs, resulting in some output inconsistency. On a more personal note, I have my machine on the countertop under a cupboard, and there's not a lot of clearance above the top of the original hopper, so loading it is a bit awkward.

There's a few single-dose hoppers available on here, notably this one: https://www.printables.com/model/80817-breville-barista-express-single-dose-hopper . For me though, that one fits a bit loose, and I also like the challenge of designing for no hardware and minimal moving parts.

 

Compatibility

Works with my Breville Barista Express BES870XL, should work for other Breville/Sage machines from the Barista line. Please let you know if you try it with one!

 

Printing and assembly

Just print each model upside-down, no supports or hardware required.

To assemble,

  • Turn your machine OFF to prevent accidental grinder activation
  • Remove the stock hopper
  • Install the ring/clip: position it pins-up, the rigid side facing away from you, and slide the rigid-side pin into the further slot. Push the spring-loaded pin in and let it spring back into the other slot. It shouldn't activate the switch on the inside in its natural, “resting” position. 
  • Position the hopper body with the bevel on the bottom, facing you. Push it into the hopper slot, twist a bit clockwise once fully in
  • Et voilà!

Changelog

v2:
  • Added a central hub to reduce popcorning and guide the beans better
  • Improved fit and stability (added clip feet, more and stronger pins)
  • Added a bit of knurling to the main body

Print settings

The tolerances here are pretty tight - please let me know if they turn out too tight for your printer!

The exact print settings shouldn't matter, however, as with most of my functional prints, I printed this with:

  • PLA
  • 0.4mm nozzle
  • 0.3mm layer height
  • 0.6mm max line width

Design files

The design is a public document in OnShape:

https://cad.onshape.com/documents/2da9f6a13e257962df9b1fb8

 

Tags