Helldivers 2 - Return to the Creek
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Helldivers 2 - Return to the Creek
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 21
- Makes
- 0
- Views
- 209
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
In honour of returning to The Creek, Redditor RyanMcartney created an amazing design that i thought id make into a hueforge. the original post can be found here: https://www.reddit.com/r/Helldivers/comments/1jnbaig/comment/mkis3pp/. The Creek is under threat and we must make sure it doesn't fall to the Automaton threat!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 134.96x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #9 (0.8mm) swap to Pure Yellow
At layer #16 (1.36mm) swap to White for the rest.