Stubby Spade Bit (4 inch) Storage - Gridfinity
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I've created a gridfinity bin for the stubby (4 inch) spade bits storage. There are two variants as the four inch is typically sold in a three pack (5/8", 3/4", 1"), or can be purchased individually (9 different sizes). I have not validated the bin to fit all variants, but I expect that it would work fine and sized the bin based on the largest size. Please note, this was based on using the diablo brand, you will need to independently verify for any other brands.
Additionally, I have 8 mm magnets embedded in the print to ensure the spade bits stay in place. Due to their high center of gravity towards the end of the spade bit, they would tend to fall down into the recessed pocket of the bin. I've also added a recess below the hex portion of the spade bit to allow the bit to pivot out of the bin for easy access.
Diablo 3 pk: https://www.homedepot.com/p/DIABLO-SPEEDemon-High-Carbon-Steel-Stubby-Spade-Bit-Set-3-Piece-DSP1910-S3/312966497
All variants listed: https://www.diablotools.com/products/DSP1010