Optimized Apple cable holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A cable holder designed to grip the thinner diameter Apple charging cables.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 223
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a super optimized cable holder for Apple OEM cables. Apple cables have a thinner diameter than many off brand cables, and thus many cable holders fail to properly catch the cable. This holder was designed to capture OEM Apple cables in the middle and right holders, with a slightly wider opening on the left for other types of cables. The slight recess allows the head of the cable to sit in the print and not flop around. Put a piece of double sided tape on the completely solid side and you’re good to go!
It can be printed in the orientation of the file, or in the diagonal orientation down. See the attached photos for more information.
I printed mine in PETG with a 0.3 mm height, but I’m sure PLA or your filament of choice at 0.3 or less will work as well.