Jabra moaural headset earpad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Earpad to prevent the arm getting tangled in long hair.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
I have long hair which is normally tied back and regularly find when I go to remove the headset that the t-bar above the open ear gets tangled up, very annoying.
I designed this to simply attach to the t-piece and it perfectly solves the problem.
I printed it in TPU but any filament should be fine. It clips on and off easily.
Please check orientation in your slicer to ensure the first layer above the pocket sections is aligned as shown to achieve the best result with no supports required.
This is sized to fit Jabra GN headsets, also some Plantronics models, the t-bar simply flexes into position, may fit others with similar dimensions. Fit's t-bar width 50mm, height 15mm and entry bar of 10mm