1 / 5
Stanley Fatmax Battery to Milwaukee Tools adaptor — image 1
1 / 5

Stanley Fatmax Battery to Milwaukee Tools adaptor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stanley Fatmax cordless tool batteries with Milwaukee tool skins

Rating
5 / 5
Likes
8
Downloads
89
Makes
0
Views
427
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Cordless tool battery adapter.

Stanley Fatmax Battery to Milwaukee skin tools
 

Extra hardware

  • 6mm male spade connector x2
  • wire
  • female fuse terminal x3
  • M3 x10mm bolt & Hex nut x2
  • 470k resistor

spring (0.5mm, 35mm, 5mm) a retractable pen spring will probably work too

Prep spade connectors like this, flatten out the shoulders if you can

Basic assembly procedure

  • remove spade terminal sheath and crimp to wires, flatten it out
  • install spring and side buttons into top
  • install wired spade terminals into base and thread into the top
  • bring top and bottom together, pulling wires through as you go
  • use nuts and bolts to bind the top and bottom together
  • trim wires appropriately to allow female terminals to fit into their slots
  • crimp female terminals, remembering to include the resistor into the positive terminal
  • push terminals into place, I used hot glue to cover up the resistor

Reach out if you need further clarification

If you like this model, please throw me a like.  Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal). Thanks!

Tags