Extandable monitor stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extandable monitor stand for most of the monitors
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Very simple monitor stand. To assemble, you will need 8 M5-30 screws. The whole thing is 480 mm wide. Without feet, it's 450 mm wide. For smaller printers, use the STL file from the folder riser-depth-250mm-split-in-half-for-smaller-printers. I recommend using some strong glue to increase the strength and stiffness of the entire structure. I printed it out of PLA+ from Sunlu, but I highly recommend using another strong filament for extra strength and stiffness. If your stand sags due to the excessive weight of the monitor, use anti-sag.stl and place it under the stand. If you need the stand to be wider, simply print more riser3 and riser4 STLs and connect them. Remember the orientation of the prints on the heatbed to maximize the strength.
If you need to edit the project simply contact me and I'll provide STEP file.