PRUSA LCD Cable Clip
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.79 – €0.97 net (excluding VAT)
For file: PRUSA LCD Cable Clip_0.15mm_PETG_MK3S_1h9m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.88 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 1.14 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Use this clip to make the LCD cable on your PRUSA printer look great.
- Rating
- 5 / 5
- Likes
- 80
- Downloads
- 316
- Makes
- 14
- Views
- 1,396
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
- can be printed in any color and any material.
- No support required, but if you have adhesion problems you should use a brim.
- bend the LCD cables like a U then insert the pointy ends in the clip and push on the back. once the cable is in the clip you can push the clip into the extrusion.
go check out my instagram: fredslund3d
and don't forget to share your results!
Good Luck and Happy Printing!