Wolverine Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a Wolverine Hueforge I threw together and hope you all can enjoy it too!
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 21
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.08mm with a base layer height of 0.16mm
The model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.5mm and the Actual Depth is 3.6mm
Filaments Used:
PLA Basic Black Transmission Distance: 0.3
PLA Polyterra Sapphire Blue Transmission Distance: 3.5
PLA Polyterra Savannah Yellow Transmission Distance: 6.5
PLA Polyterra Cotton White Transmission Distance: 5
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Sapphire Blue
At layer #20 (1.68mm) swap to Savannah Yellow
At layer #30 (2.48mm) swap to Cotton White for the rest.
(It takes a long time to slice and is a relatively long print too)