Weed Mat Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Take control of your garden with my DIY-friendly weed mat holder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Standard Digital File License
Take control of your garden with my DIY-friendly weed mat holder.
Easy assembly involves laying the weed mat over the base, sliding in the top frame, and securing with three bolts. Finish by anchoring with steel rods for a lasting weed barrier.
Hole for the fixing rod is 12mm wide, holes for bolts are 6.5mm wide.
I've secured my 5.25 x 20m weed mat with 5 holders on each side of the weed mat.
Print settings:
- ASA filament, 0.2mm layer height, 5 layers for top & bottom, 5 walls, 25% infill.
Bill of materials:
- Bolts M6x25mm // 3 pcs
- Wide washers M6 // 6 pcs
- Nuts M6 // 3 pcs
Capture, build, design: Your support makes it real <3
Donation link: https://www.paypal.com/donate/?hosted_button_id=DLVG74XGXAY8S