1 / 4
Honda Jazz / Fit MK2: Console USB Mount for Replacement Head Units — image 1
1 / 4

Honda Jazz / Fit MK2: Console USB Mount for Replacement Head Units

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fit your third-party headunit's USB socket right into where the old one was and get rid of the weird OEM connector.

Rating
0 / 5
Likes
7
Downloads
62
Makes
0
Views
465
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

I bought an Android headunit from Aliexpress and it came with USB sockets on a pigtail with no way of mounting them, basically. These prints let you clamp that socket in place of the OEM headunit's USB socket, which uses it's own bizarro-world automotive pigtail.

You will need:

  • 4x M2 Countersunk & Self-tapping ~5mm
  • 2x M2 Countersunk & Self-tapping ~16mm

And then roughly:

  1. Pop out the trim, etc. and remove the existing USB port which is fit in with tabs.
  2. Install the front/back prints into the trim where the USB port was and screw it together with the shorter screws. There's only one way it'll fit.
  3. Feed your USB cable through clamp and push it all into the clamp, then use the longer screws to keep it secure. It doesn't need to screw down all the way.
  4. Clip it all back into place and carry on with your headunit install.

Tags