1 / 10
QIDI Plus4 Exhaust Adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exhaust Adapter for the QIDI Plus4 to connect 100mm Duct Hose.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 77
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A silicone rubber gasket with outer diameter of 100 mm and diameter of 3.5mm is required.
This adapter can be connected to a duct with a diameter of 100 mm.
Depending on the hardness of the silicone O-ring you use, you may need to cut the tabs with a cutter or something simillar.
Does not interfere with “Filament Poop Chute”(https://www.printables.com/model/1024451-qidi-plus4-filament-poop-chute).
The silicone O-ring I used was made by Othmro. (https://amzn.asia/d/fZ7vnC0)