1 / 1
Asus Strix B450i gaming I/O shield
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I/O shield
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Public Domain
Meshed I/O shield made for the Asus Strix B450i gaming, snaps perfectly in place thanks to little bulges on the outside. When viewing it in 3d you will just see a filled piece, to obtain a meshed version you shall set this parameters on Bambu Studio (I don’t know about other slicers, but I suppose it’s almost the same):
- Top/Bottom Shell layers set to 0
- increase wall loops, i made them 4
- Sparse infill density, i used 50% with the grid pattern, feel free to experiment
- Reduce a little the wall infill overlap, make it like 10%ish
- Change “only one wall on top surfaces” to not applied, otherwise the infill would go over the last layer of wall (this setting may not be necessary on other slicers)