1 / 3
X-Shot Pro Fury X Slanted Grip
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bottom Grip Piece for the X-Shot Pro Fury X
- Rating
- 4.667 / 5
- Likes
- 96
- Downloads
- 545
- Makes
- 6
- Views
- 1,714
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is slanted grip piece for the X-Shot Pro Fury X that attached via the rail on the bottom. It should be just slide-on friction fit, but the tolerances are funky, so I've also provided the .step file in case you need to adjust it. Additionally, there's a retainer piece that will hopefully lock into place in the case it's a loose fit, but I personally didn't use it.
CHANGELOG
- 4/14/25 - Added cutout for trigger safety, loosened retainer piece by 0.1 mm on all sides.
PRINT SETTINGS
- Requires no additional hardware.
PRINT SETTINGS
- Printed with front slant on bed.
- Supports are not required, might want a brim for adhesion though.