1 / 1
Inateck USB 3.2 hub under desk holder HB2025 and similar — image 1

Inateck USB 3.2 hub under desk holder HB2025 and similar

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A solid 2 piece under desk/table holder for this USB Hub.

Rating
5 / 5
Likes
4
Downloads
20
Makes
0
Views
139
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is an under desk/table mount for the Inatech USB 3.2 hub on Amazon.  (HB2025 and similar shape models)

Designed so that when the backing plate is installed and screwed down there is very little movement/play when inserting removing USB drives etc. Though this will depend on print accuracy of course (Printed on Bambu Lab A1 with standard 2.0LH settings)

It requires 6 x M3 countersunk bolts, either 6 or 8mm in length to secure the backing plate. 
2 x M3 screws required to fix the mount to the bottom of the desk.
You can also double side tape the mount under the desk for added security.
A USB C extension cable to connect to your PC may be likely depending on which version of the hub you purchased (some are rather short)

Print without supports in the orientation the stl files come with.


Installation should be pretty self explanatory, I forgot to take photos before installing on this one, but my version of this for a UGreen USB hub is very similar, and has better photos. So check those out if you're having trouble. 

https://www.printables.com/model/1254190-ugreen-cm806-usb-32-hub-under-desk-holder




 

Tags