Pennywise Clown Bookmark
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bookmark for your horror book adventures
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 71
- Makes
- 1
- Views
- 197
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 55x163.62mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2mm and the Actual Depth is 2.1mm
Filaments Used:
PLA Aurapol Black Transmission Distance: 0.3
PLA Aurapol Red Transmission Distance: 4
PLA Aurapol Grey Transmission Distance: 1
PLA Aurapol White Transmission Distance: 5
This print uses 4 unique filaments (You can also use similar colors from other manufacturers)
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #12 (1.04mm) swap to Grey
At layer #19 (1.6mm) swap to White for the rest.