1 / 2
Pick of Destiny Guitar Pick - works — image 1
1 / 2

Pick of Destiny Guitar Pick - works

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This pick actually works! But, it doesn't make you the best guitarist of all time, unfortunately. We are the D!

Rating
0 / 5
Likes
9
Downloads
128
Makes
0
Views
355
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution

This pick is thin with just a few layers thick, but works surprisingly well. I printed the one in the image in PLA but would be interested how one would work with the different properties of PETG, ABS, or TLA (post makes below!)

 

Print Instructions: printed on Ender 3 v3-SE (Cura slicer)

+ Standard printer settings will work with this file.

        Nozzle: 0.4mm

        Layer Height: I used 0.16mm (0.2mm will work)

        Infill: 100%, this thing is all layers

        Temperature/Material: dependent on filament recommendations

        Supports: No

        Build Plate Adhesion: Skirt

        Model Orientation: Print with flat part of pick facing down.

        Post-Processing: None

+ I used PLA for this print, however, if you're concerned about durability or other properties, this can easily be printed in PETG or ABS.

+ The design was simple from a *.png file I created in Gimp (free photo editing software) and exported as 3 separate layers as SVG files.

 

*I am not an affiliate with Tenacious D (although I wish I was)

 

Tags