Neptune 4 improved Trash Bin
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An improved version of the trash bin that come just under the bed
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 40
- Makes
- 1
- Views
- 156
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Neptune 4 trash bin
I make a lot of filament change for my print and the little purge poop is such a nightmare to take off every time.
I printed the model of @Some1Lambda_2596741, but found that the filament often drop between the bin and the bed, so i made a improved version.
This version as the same clip as the original but the little slope under the bed make the filament easier to drop directly into the bin.
You just have to let your printer make is purge and when it go for print the purge go directly into the bin
WARNING !
Check if the bed connector at the back dont touch the bin or the wheel before start any print
Print setting :
0.2 or 0.1 layer height
3 or more perimeters
Minimum 15% infill
Print slow the first layer and be sure to have a bed perfectly leveled.
Can use a brim to help adhesion
I recommend using PETG to print this for is better heat resistance because this model is near to the bed, PLA could work too but i didn't test it
(If u enjoy my design u can like, follow and tip me)