1 / 1
Better 4U+ latch tolerances for Gridfinity Rugged Case "Light" R3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified latches from close fit to loose fit to improve durability, ease of installation, and ease of use.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 143
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The tolerance on the original latches are too tight for FDM printers. The hole diameter is only 3.2mm (close fit), but even my Bambu P1S can't accurately hold that tolerance. As a result, moving the latches will rotate the screw itself in the case, causing unnecessary wear on the case. I've increased the hole diameter to 3.4mm (normal fit), which allows the latches to freely rotate AND make installation easier :).