Timelapse trigger holder for Prusa Mini+
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Timelapse trigger holder for d3v-163-1c5 microswitch to be used on Prusa Mini+
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 27
- Makes
- 2
- Views
- 504
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Timelapse trigger holder for d3v-163-1c5 microswitch.
I suggest using long arm version of the switch. Will be triggered at X=0, custom G-code needed for timelapse (see below).
Print clip side down, as show in print bed image. Clips can (and probably will) break if not printed flat.
IMPORTANT: Use Settings > Move axis and make sure you have enough space on X-axis when X=0! If switch is not activated at X=0 and released at X=2, please modify coordinates at custom g-code as needed.
Adjust wait times and speeds on g-code to match your equipment. Please reference Google for wiring your trigger.
Custom timelapse G-code (for reference): https://pastebin.com/zcenEVkP
Print Settings
Printer:
Prusa Mini+
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament: Generic / Prusament PLA
Category: Camera