Pinecil iron silhouette for large lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
cut out a silhouette of the pencil soldering iron for the lid, especially visible when use with separate color inserts
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 23
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with same settings as original lid. I used pla+ with 15% infill @ 200 degrees
- - - - - - - - - - -
I also included the SVG (made in GIM) and the DXF (made from inkscape w/ GIMPs SVG) for anyone who wants to adapt this to the medium or small cases. I did have significant trouble with the dxf in autodesk inventor and had to spend a while closing loops, even though all lines appeared connected – so just be warned!
- - - - - - - - - - -
ps. I had the logo pointed the wrong way originally (iron pointing right), so I flipped my inserts around to match it so I didn't have to re-print. This can be seen in the images, but the file has been mirror and corrected to point to the left, so any prints should match the standard case setups perfectly. If you want it the opposite direction for some reason, simply mirror it in your slicer