Naruto_Front
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you like Naruto, One Piece, Sailor Moon? I'll make the posters of all famous features!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 9
- Makes
- 0
- Views
- 30
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Project: Naruto.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 135x239mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.8mm and the Actual Depth is 1.9mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sunlu Red Transmission Distance: 4.1
PLA Sunlu Yellow Transmission Distance: 6
PLA Sunlu White Transmission Distance: 5.9
This print uses 4 unique filaments
Other brands of filaments with similar TD will work as well.
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Red
At layer #13 (1.12mm) swap to Yellow
At layer #15 (1.28mm) swap to White for the rest.