Eggsecutor!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Eggsecutor was left in the basket for a reason. With a grin full of secrets (and maybe teeth that shouldn’t be there)
- Rating
- 4.714 / 5
- Likes
- 98
- Downloads
- 251
- Makes
- 9
- Views
- 783
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Spring & Easter
- License
- Standard Digital File License
Eggsecutor was left in the basket for a reason. With a grin full of secrets (and maybe teeth that shouldn’t be there), this little troublemaker brings a chaotic twist to any Easter display. He’s eggstremely confident, mildly unhinged, and absolutely up to something.
The little green one was painted however I have included a 3mf file suitable with colour printers!
UPDATE: IMPROVED PRINTABILITY — Thanks to some awesome feedback, the Eggsecutor just got even easier to print!
- Inner hole slightly reduced and reshaped for a cleaner look
- Model now prints in place with a flat slice at the bottom, positioning the egg at a slight angle — this helps reduce visible print lines and improves overall print quality
- No supports required — the model has been modified with a flat base for easier printing
Updated files are named improvedPrintabilityEggsecutor (and similar variants)
Print Settings:
I used auto tree supports in junction to the mini support you will see during slicing, after print is complete its satisfying to take the tree supports off and have a fully round egg model!
Layer Height: 0.1-0.2mm, Infill Density: 15%, Infill Pattern: Default slicer or experiment with other patterns!, Print Speed: 50–60 mm/s, Support Type: Auto Tree, Bed Temperature: 60°, Material: I have only used PLA so far!