Replaceable grooved tips for Bernstein tweezers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaceable grooved tips for Bernstein tweezers with 1mm diameter and 45° angle.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 129
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I needed some grooved tweezers to better hold wires or pins when soldering, because even the serrations in some tweezers would allow the wire to rotate.
I found the 5-064 style of tweezers from Bernstein, but since I have a 5-434 I decided to design replaceable tips for it. The current version has about a 1mm groove diameter at a 45° angle. The prototype printed in PLA will probably not hold up for long, but that's why they are replaceable and next time I'll print them in a different material.
The included STEP file should allow you to customize the shape to your needs
Printing
Duplicate and mirror in slicer to create a matching pair of tips, see bgcode file for print settings. The small groove was a bit tricky, but .1mm layers worked ok.