BMW R1300GS Vario Topcase strap eyelet replacement in different colors, if you dont like the original black ones
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
BMW R1300GS Vario Topcase Gurtösen Ersatz in verschiedenen Farben, wenn dir die schwarzen originale nicht gefallen
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 22
- Makes
- 0
- Views
- 206
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
BMW R1300GS Vario Topcase strap eyelet replacement in different colors, if you dont like the original black ones or have a broken strap eyelet
The strap eyelets on the title picture are printed in PETG Galaxy Silver
Caution: The tensile strength of the eyelets depends on the filament used. It is recommended to only attach lightweight objects to the eyelets.
Mounting instructions
Remove the original strap eyelets by loosening the two screws per eyelet with a Torx 20 bit. Mount the 3d printed strap eyelets using the original screws, tightening torque 6Nm
Printing instructions
- These are recommendations based on testprint results (Prusa Slicer)
- PETG or ASA (tested only with parts printed with PETG filament)
- 0.4 nozzle
- 0.2mm Structural
- support on build plate only
- Paint-on supports (L) Automatic painting
- Support material organic
- infill 20%
- fill pattern 3D Honeycomb