1 / 2
Veritas Router Plane Blade Storage Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box to hold router plane blades for a Veritas Router Plane
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 26
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Remake of Rugged Box (Parametric) by Whity
Material
PETG, ASA, ABS, etc (Latch is recommended in PETG)
Additional Parts
2 - M3x30mm screws (Latch)
1 - M3x50mm screw (Rear Hinge, two smaller screws could probably be used and inserted from opposite directions)
1 - 3/8 to 1/2 inch thick (10mm - 12mm) piece of foam for lid
Assembly
Print the parts, assemble with screws and insert the foam into the lid. Glue for the foam may be required. Seal is optional.