1 / 6
Self watering planter 130mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small self-watering pot which I call it "Platinum". The diameter is about 130mm.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 25
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A small self watering planter with a diameter about 100mm. The outer diameter is 130mm.
It is simple to print. You need support only for the cap and swim body. The swim body has to be filled up with styrofoam.
Reduce you print speed and print the outer pott with at least 3 walls and increase the overlap filling/wall to 20% to avoide leakage. Otherwise you can use a thin layer epoxy resin to tight it up.